• Teach you how to draw a simple PCB schematic in seven steps

    2019-11-05 | Author : FanyPCB

    Teach you how to draw a simple PCB schematic in seven steps插圖

    The PCB layout design schematic?can be completed in seven steps.

    1.Design drawing size

    After Open Protel 99/ Schematic, it is indispensable to conceptual parts?drawings, set the appropriate size of the drawing, the suitable drawing is based on the scale of the circuit diagram, the appropriate drawing size?is?the basis for designing schematics.

    2.Setting up the Protel 99/Schematic design environment

    The environment design mentioned here includes setting the grid size and type, cursor type, etc. Of course, most of the parameters use the default value.

    3.Rotating parts

    According to the needs of the circuit diagram, the user removes the parts from the parts library and places them on the drawing, and defines and sets the part number and part package of the placed parts.

    4.Schematic wiring

    With the various tools provided by Protel 99/Schematic, the components on the drawing are connected by electrically conductive wires and symbols to form a complete schematic.

    5.Adjusting the circuit?line

    The preliminary drawing of the circuit diagram is further adjusted and modified to make the schematic diagram more beautiful.

    6.Report output

    Various reports are generated by Protel 99/Schematic?with various reporting tools provided. The most important report is the network table, which is prepared for subsequent board design through the network table.

    7.File saving and printout

    The final steps are file saving and printout.

    if you want to ask some question,you can send email pcb@fany-eda.com.